Mate ValuGrind™


ValuGrind™ Tool Grinding System

Mate’s ValuGrind™ Tool Grinding System regrinds punches and dies to maintain optimum condition for the highest quality punch press fabrication.

ValuGrind™ accommodates both Thick Turret, Trumpf Style Size 1 and 2, Murata Wiedemann and Thin Turret tooling. Customized to your requirements, you select the model based on fixture style and electrical wiring needs.

  • Affordable
  • Compact overall size
  • 32.28(820.0) Length
  • 20.47(520.0) Width
  • 26.57(675.0) Height
  • Superior finish of ground surfaces
  • Simple and safe operation
  • Low maintenance and low operation costs
  • Easy tool set up
  • Easy installation

Tooling System Compatibility

Thick Turret

ULTRA TEC®Ultra XT™Original StyleMXC™AMX™MTG™MT™
A - 1/2”A - 1/2”A - 1/2”A - 1/2”A - 1/2”3 station8 mm
B -1-1/4”B -1-1/4”B -1-1/4”B -1-1/4”B -1-1/4”8 station16 mm
C - 2”C - 2”C - 2”C - 2”C - 2”8 station- long24 m
D -3-1/2”D -3-1/2”D -3-1/2”D -3-1/2”D -3-1/2”
E -4-1/2”E -4-1/2”E -4-1/2”E -4-1/2”E -4-1/2”

Trumpf Style

NEXT™QuickLock™ Standard StyleStandard Style
Size 40Size 1Size 0-A3 station
Size 76Size 1Size 0-B4 Station
Size 15 station
Size 1-X6 station
Size 210 station
Size 3

Murata Wiedemann

Marathon®114 Style112 Style Varitool
B through H StationA through J StationA through H Station6 Station
8 Station
12 Station

Thin Turret

Thin Turret Style3-1/2" StyleMTG
1/2" Station3-1/2″ Station, Inch Shank3 Station
5/8″ Station3-1/2″ Station, Strippit Style8 Station
1-1/4″ Station
2″ Station Strippit Style

ValuGrind Benefits

Mate ValuGrind™ provides:

A superior grinding finish and ground surface flatness with its:

  • Belt drive that ensures optimum wheel RPM
  • Large diamond grinding wheel with inner cooled cup-style design that delivers coolant exactly where needed to prevent burning or discoloration
  • Rigid and robust design

Faster grinding of larger tools because it comes with a:

  • Large motor that can accommodate up to Thick Turret E-station dies
  • Large grinding wheel 6.46(165,0)

No need for any wiring changes before use:

  • Electrical configurations available to fit your local needs in any country so it is ready to plug in and begin grinding*

Quick setup for grinding tools, and the flexibility to grind anything that will fit on its magnetic base.

Minimal maintenance:

  • Manufactured with quality components like Siemens electric motors
  • Uses CBN grinding wheels
  • Coolant screens that greatly reduce the amount of grinding swarf and allow for easier cleaning

Easy to use operation:

  • Portable tabletop design can be used virtually anywhere, even if space is limited
  • Pre-fixtured to grind all of Mate’s Thick Turret or Trumpf style tools
  • Easy to expand tool style grinding capability by simply purchasing other available fixture sets
  • All you need to do is unpack it, add coolant, plug it in and grind

Safe to use operation:

  • Sturdy construction so it will not move or tip when in use
  • Minimally exposed grinding wheel and safety stop button
  • Tinted polycarbonate safety shield
  • Diffuser-lined tub walls to keep coolant splatter to a minimum

ValuGrind Order Information

Each ValuGrind System includes grinding fixture set for tool style selected.



TT_punch_fixture_illus MT_punch_fixture_illus Tr_punch_fixture_illus  Belt
Thick Turret & MT Style Fixture Set – MATE01953 Trumpf Style Fixture Set – MATE01954 Drive Belt 10x375mm – MATE01960
 MW_VG_Fixtures Thin_VG_Fixtures62  VG_Cleaning_Stick
Murata Wiedemann Fixture Set – MATE01994 Thin Turret Fixture Set – MATE01993 Cleaning Stick – CLS00001

ValuGrind Order Information

Tool StyleVoltage Phase HertzPlug Style*Part Number
Thick Turret208 V360 Hz20 amp MATE01946
Trumpf Style208 V360 Hz20 ampMATE01947
Murata Wiedemann208 V360Hz20 ampMATE01996
Thin Turret 208 V360 Hz20 ampMATE01995
Thick Turret 400 V350/60 Hz 16 ampMATE01948
Trumpf Style400 V350/60 Hz16 ampMATE01949
Murata Wiedemann400 V 350/60 Hz16 ampMATE01998
Thin Turret400 V350/60 Hz 16 ampMATE01997

* Any changes necessary to the plug style are the responsibility of the end user and need to be done by a certified electrician.