Amada Style


Overview

Mate’s Amada style thin turret punch presses guarantee superior performance in every punching application. Here are just a few of the features that make this a true statement.

1/2” Station Snap-Apart

  • Punch Head – Superior flatness for precise distribution of punching forces.
  • Spring – Precise coil specification for optimum stripping performance.
  • Spring Retainer – Precisely machined to seat securely on the punch shoulder to reduce punching stress.
  • Punch – DuraSteel™ with superior hardness and toughness for maximized tool life.
  • Stripper – Smooth rounded edges to eliminate sheet marking.
  • Guide assembly – Compatible with existing inventory.
  • Mate Slug Free® Die – Eliminate slug pulling to improve piece part quality and increase tool life.

5/8” Station Drop-In

  • Punch Head – Knurled edges for secure handling during installation and adjustment.
  • Punch– DuraSteel™ with hardened double-D key for precise orientation of shaped tools.
  • Stripper – Fully compatible and interchangeable with existing inventory.
  • Guide and Canister assembly – Self-contained, pre-loaded spring and hardened guide.
  • Mate Slug Free® Die – Optimum balance between hardness and toughness.

1-1/4” Station Full Body

  • Punch Head – Compatible with existing inventory.
  • Spring – Shot-peened to eliminate residual stresses, for extended service life.
  • Spring Retainer – Precisely machined to provide reliable operation, especially at high speed.
  • Punch – DuraSteel™, with 1/4-degree back taper to reduce friction, eliminate galling and extend tool life.
  • Stripper/Guide – Hardened and ground for superior angularity and concentricity.
  • Mate Slug Free® Die – Uniform corner clearance radius to eliminate pip marks.

3-1/2” Station

  • Punch Head – Compatible with existing inventory.
  • Spring – Shot-peened to eliminate residual stresses, for extended service life.
  • Spring Retainer – Precisely machined to provide reliable operation, especially at high speed.
  • Punch – DuraSteel™, with 1/4-degree back taper to reduce friction, eliminate galling and extend tool life.
  • Stripper/Guide – Hardened and ground for superior angularity and concentricity.
  • Mate Slug Free® Die – Uniform corner clearance radius to eliminate pip marks.