{"id":8114,"date":"2015-09-01T13:56:43","date_gmt":"2015-09-01T13:56:43","guid":{"rendered":"https:\/\/www.mate.com\/cs\/technical-resources\/tips-techniques\/materials\/punching-different-materials\/"},"modified":"2015-09-01T13:56:43","modified_gmt":"2015-09-01T13:56:43","slug":"punching-different-materials","status":"publish","type":"page","link":"https:\/\/www.mate.com\/cs\/technical-resources\/punch-press-resources\/tips-techniques\/materials\/punching-different-materials\/","title":{"rendered":"Punching Different Materials"},"content":{"rendered":"<h2>Punching Thick Material &#8211; Over 0.157(4,00)<\/h2>\n<ul>\n<li>Use sharp punches and dies &#8211; sharpen when cutting edge has a .003 &#8211; .005 (.07 &#8211; .13) radius proper sharpening is critical<\/li>\n<li>Clearance of 25 &#8211; 30% of material thickness (reference die clearance chart)<\/li>\n<li>Heavy duty back taper on punches<\/li>\n<li>Punch to material thickness of 1:1 (minimum)<\/li>\n<li>Minimum punch size of 0.250(6.40)<\/li>\n<li>0.020(0.50) radius on all punch corners<\/li>\n<li>Inspect tools frequently for wear<\/li>\n<li>Lubricate the sheet, punch, guide<\/li>\n<li>Run machine on slow cycle<\/li>\n<li>Special care should be taken NOT to exceed press capacity (tonnage) when punching large shapes &#8211; for best results, use 80% of press capacity<\/li>\n<li>Bridge hitting is recommended &#8211; this will keep a balanced load on the punch<\/li>\n<li>Nibbling is NOT recommended &#8211; if you must nibble, use 70% minimum of punch length &#8211; Do NOT nibble with width of punch<\/li>\n<li>Heavy Duty Tooling recommended &#8211; (114 Style and ULTRA TEC\u00ae available)<\/li>\n<li>Use Maxima\u2122 coated punches<\/li>\n<li>Use a special shear punch (Shear punches are best for minimizing tonnage when blanking parts.)\u00a0 Benefits of using a shear punch:\n<ul>\n<li>Reduced tonnage<\/li>\n<li>Noise reduction<\/li>\n<li>Slug control<\/li>\n<li>Reduced shock loads<\/li>\n<li>Improved stripping<\/li>\n<\/ul>\n<\/li>\n<\/ul>\n<h2>Heavy Duty Tooling Advantages<\/h2>\n<ul>\n<li>1\u00ba back taper (per side) on punches<\/li>\n<li>Heavy duty SLUG FREE\u00ae die design<\/li>\n<li>Heavy duty springs (ULTRA TEC\u00ae canister)<\/li>\n<li>Rooftop shear &#8211; D station and larger (114) &#8211; B station and larger (ULTRA TEC)<\/li>\n<li>Radius on all 90\u00ba corners to improve corner strength<\/li>\n<li>Premium M2 tool steel (ULTRA TEC punches)<\/li>\n<li>Quick length adjust (ULTRA TEC)\u2022<\/li>\n<li>Quick tool change (ULTRA TEC)<\/li>\n<li>Maxima\u2122 coating option (M2 ULTRA TEC punches only)<\/li>\n<\/ul>\n<h2>Punching Thin Material &#8211; Less than 0.020(0,50)<\/h2>\n<ul>\n<li>Use sharp punches and dies<\/li>\n<li>Use appropriate die clearance<\/li>\n<li>Use Slug Free Light dies<\/li>\n<li>Ensure proper tool alignment<\/li>\n<li>Use special point tolerance for punch and stripper<\/li>\n<li>Use proper die penetration<\/li>\n<li>Use guides in good condition<\/li>\n<li>Use Fully Guided punches<\/li>\n<li>Demagnetize tooling after sharpening to help prevent slug pulling<\/li>\n<li>Use Maxima\u2122 coated or Nitride treated punches<\/li>\n<li>Avoid use of die adapters<\/li>\n<li>Use SLUG FREE\u00ae dies to reduce slug pulling (blanking may benefit from non-SLUG FREE dies)<\/li>\n<li>Use slug ejectors for thin materials<\/li>\n<li>Avoid use of station adapters if possible<\/li>\n<li>Use shorter slitting tools<\/li>\n<\/ul>\n<h2>Punching Non-Metallic Material<\/h2>\n<ul>\n<li>Use sharp punches and dies<\/li>\n<li>Reduce die clearance by 5% &#8211; 8%<\/li>\n<li>Run the machine on slow cycle<\/li>\n<li>Lubricate hard plastic if possible<\/li>\n<li>Use Maxima\u2122 coated punches<\/li>\n<li>If marking occurs use urethane pads<\/li>\n<li>Support thin material when possible<\/li>\n<\/ul>\n","protected":false},"excerpt":{"rendered":"<p>Punching Thick Material &#8211; Over 0.157(4,00) Use sharp punches and dies &#8211; sharpen when cutting edge has a .003 &#8211; .005 (.07 &#8211; .13) radius proper sharpening is critical Clearance of 25 &#8211; 30% of material thickness (reference die clearance chart) Heavy duty back taper on punches Punch to material thickness of 1:1 (minimum) Minimum [&hellip;]<\/p>\n","protected":false},"author":5,"featured_media":0,"parent":8113,"menu_order":590,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_acf_changed":false,"footnotes":""},"class_list":["post-8114","page","type-page","status-publish","hentry"],"acf":[],"yoast_head":"<!-- This site is optimized with the Yoast SEO Premium plugin v28.8 (Yoast SEO v28.8) - https:\/\/yoast.com\/product\/yoast-seo-premium-wordpress\/ -->\n<title>Punching Different Materials - Mate Precision Technologies<\/title>\n<meta name=\"description\" content=\"Punching Thick Material - Over 0.157(4,00) Use sharp punches and dies - sharpen when cutting edge has a .003 - .005 (.07 - .13) radius proper sharpening\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.mate.com\/cs\/technical-resources\/punch-press-resources\/tips-techniques\/materials\/punching-different-materials\/\" \/>\n<meta property=\"og:locale\" content=\"cs_CZ\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Punching Different Materials\" \/>\n<meta property=\"og:description\" content=\"Punching Thick Material - Over 0.157(4,00) Use sharp punches and dies - sharpen when cutting edge has a .003 - .005 (.07 - .13) radius proper sharpening\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.mate.com\/cs\/technical-resources\/punch-press-resources\/tips-techniques\/materials\/punching-different-materials\/\" \/>\n<meta property=\"og:site_name\" content=\"Mate Precision Technologies\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/MatePrecisionTechnologies\/\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:site\" content=\"@mateprecision\" \/>\n<meta name=\"twitter:label1\" content=\"Odhadovan\u00e1 doba \u010dten\u00ed\" \/>\n\t<meta name=\"twitter:data1\" content=\"2 minuty\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.mate.com\\\/cs\\\/technical-resources\\\/punch-press-resources\\\/tips-techniques\\\/materials\\\/punching-different-materials\\\/\",\"url\":\"https:\\\/\\\/www.mate.com\\\/cs\\\/technical-resources\\\/punch-press-resources\\\/tips-techniques\\\/materials\\\/punching-different-materials\\\/\",\"name\":\"Punching Different Materials - Mate Precision Technologies\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.mate.com\\\/cs\\\/#website\"},\"datePublished\":\"2015-09-01T13:56:43+00:00\",\"description\":\"Punching Thick Material - Over 0.157(4,00) Use sharp punches and dies - sharpen when cutting edge has a .003 - .005 (.07 - .13) radius proper sharpening\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.mate.com\\\/cs\\\/technical-resources\\\/punch-press-resources\\\/tips-techniques\\\/materials\\\/punching-different-materials\\\/#breadcrumb\"},\"inLanguage\":\"cs\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.mate.com\\\/cs\\\/technical-resources\\\/punch-press-resources\\\/tips-techniques\\\/materials\\\/punching-different-materials\\\/\"]}]},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.mate.com\\\/cs\\\/technical-resources\\\/punch-press-resources\\\/tips-techniques\\\/materials\\\/punching-different-materials\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Dom\u016f\",\"item\":\"https:\\\/\\\/www.mate.com\\\/cs\\\/\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Technick\u00e9 zdroje\",\"item\":\"https:\\\/\\\/www.mate.com\\\/cs\\\/technical-resources\\\/\"},{\"@type\":\"ListItem\",\"position\":3,\"name\":\"Tips &#038; Techniques\",\"item\":\"https:\\\/\\\/www.mate.com\\\/cs\\\/technical-resources\\\/tips-techniques\\\/\"},{\"@type\":\"ListItem\",\"position\":4,\"name\":\"Materials\",\"item\":\"https:\\\/\\\/www.mate.com\\\/cs\\\/technical-resources\\\/punch-press-resources\\\/tips-techniques\\\/materials\\\/\"},{\"@type\":\"ListItem\",\"position\":5,\"name\":\"Punching Different Materials\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.mate.com\\\/cs\\\/#website\",\"url\":\"https:\\\/\\\/www.mate.com\\\/cs\\\/\",\"name\":\"Mate Precision Technologies\",\"description\":\"Workholding, Press Brake, Punch Press and Laser Technologies\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/www.mate.com\\\/cs\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"cs\"}]}<\/script>\n<!-- \/ Yoast SEO Premium plugin. -->","yoast_head_json":{"title":"Punching Different Materials - Mate Precision Technologies","description":"Punching Thick Material - Over 0.157(4,00) Use sharp punches and dies - sharpen when cutting edge has a .003 - .005 (.07 - .13) radius proper sharpening","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.mate.com\/cs\/technical-resources\/punch-press-resources\/tips-techniques\/materials\/punching-different-materials\/","og_locale":"cs_CZ","og_type":"article","og_title":"Punching Different Materials","og_description":"Punching Thick Material - Over 0.157(4,00) Use sharp punches and dies - sharpen when cutting edge has a .003 - .005 (.07 - .13) radius proper sharpening","og_url":"https:\/\/www.mate.com\/cs\/technical-resources\/punch-press-resources\/tips-techniques\/materials\/punching-different-materials\/","og_site_name":"Mate Precision Technologies","article_publisher":"https:\/\/www.facebook.com\/MatePrecisionTechnologies\/","twitter_card":"summary_large_image","twitter_site":"@mateprecision","twitter_misc":{"Odhadovan\u00e1 doba \u010dten\u00ed":"2 minuty"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"WebPage","@id":"https:\/\/www.mate.com\/cs\/technical-resources\/punch-press-resources\/tips-techniques\/materials\/punching-different-materials\/","url":"https:\/\/www.mate.com\/cs\/technical-resources\/punch-press-resources\/tips-techniques\/materials\/punching-different-materials\/","name":"Punching Different Materials - Mate Precision Technologies","isPartOf":{"@id":"https:\/\/www.mate.com\/cs\/#website"},"datePublished":"2015-09-01T13:56:43+00:00","description":"Punching Thick Material - Over 0.157(4,00) Use sharp punches and dies - sharpen when cutting edge has a .003 - .005 (.07 - .13) radius proper sharpening","breadcrumb":{"@id":"https:\/\/www.mate.com\/cs\/technical-resources\/punch-press-resources\/tips-techniques\/materials\/punching-different-materials\/#breadcrumb"},"inLanguage":"cs","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.mate.com\/cs\/technical-resources\/punch-press-resources\/tips-techniques\/materials\/punching-different-materials\/"]}]},{"@type":"BreadcrumbList","@id":"https:\/\/www.mate.com\/cs\/technical-resources\/punch-press-resources\/tips-techniques\/materials\/punching-different-materials\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Dom\u016f","item":"https:\/\/www.mate.com\/cs\/\/"},{"@type":"ListItem","position":2,"name":"Technick\u00e9 zdroje","item":"https:\/\/www.mate.com\/cs\/technical-resources\/"},{"@type":"ListItem","position":3,"name":"Tips &#038; Techniques","item":"https:\/\/www.mate.com\/cs\/technical-resources\/tips-techniques\/"},{"@type":"ListItem","position":4,"name":"Materials","item":"https:\/\/www.mate.com\/cs\/technical-resources\/punch-press-resources\/tips-techniques\/materials\/"},{"@type":"ListItem","position":5,"name":"Punching Different Materials"}]},{"@type":"WebSite","@id":"https:\/\/www.mate.com\/cs\/#website","url":"https:\/\/www.mate.com\/cs\/","name":"Mate Precision Technologies","description":"Workholding, Press Brake, Punch Press and Laser Technologies","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.mate.com\/cs\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"cs"}]}},"_links":{"self":[{"href":"https:\/\/www.mate.com\/cs\/wp-json\/wp\/v2\/pages\/8114","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.mate.com\/cs\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.mate.com\/cs\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.mate.com\/cs\/wp-json\/wp\/v2\/users\/5"}],"replies":[{"embeddable":true,"href":"https:\/\/www.mate.com\/cs\/wp-json\/wp\/v2\/comments?post=8114"}],"version-history":[{"count":0,"href":"https:\/\/www.mate.com\/cs\/wp-json\/wp\/v2\/pages\/8114\/revisions"}],"up":[{"embeddable":true,"href":"https:\/\/www.mate.com\/cs\/wp-json\/wp\/v2\/pages\/8113"}],"wp:attachment":[{"href":"https:\/\/www.mate.com\/cs\/wp-json\/wp\/v2\/media?parent=8114"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}