Introducing Mate QuickLock™ Tooling System
Mate
QuickLock™ is a new tooling system for Trumpf
style presses that combines the economy of conventional
Trumpf style tooling with the convenience of alignment
via a keyed alignment ring. The keyed alignment ring
engages the alignment key in the punch for quick tool
alignment without an alignment fixture, resulting in
quicker tool set-ups and maximum machine productivity.
Mate QuickLock™ Tooling
System Features:
- High-speed steel punches for extended
interval between sharpening.
- Punches include an alignment key for
use with the Mate QuickLock™ alignment ring.
- Alignment ring with a keyway that
engages the key on both Mate QuickLock size 1 and
size 2 punches for quick and accurate tool alignment
of both .
- Urethane strippers, in an extended
size range, for quieter operation and improved piece
part quality.
- Highly wear-resistant punches and
dies.
 Mate
QuickLock™ Universal Alignment Ring
- Precision machined keyway to
accept the hardened punch key for accurate alignment,
relative to the die aperture, without the need for
a fixture.
- Precision ground upper and lower
surfaces for positive contact with the punch shoulder
for reduced tool stress and maximum service life.
- Elimination of the possibility
of punch rotation, with a solid contact between the
punch key and the alignment ring keyway.
- Shock resistant tool steel to
eliminate cracking, for longer service life.
- Compatible with conventional,
Trumpf style, size 2 punches.
- Universal for both Mate QuickLock
size 1 and size 2 punches.
 Mate QuickLock™ Punches
- High-Speed Steel,
for extended intervals between sharpening.
- Hardened and ground key for quick
and accurate punch alignment.
- For punches
with a diagonal dimension up to 2.000(50.80) the
alignment pin is located on the shank.
- For punches
with a diagonal dimension greater than 2.000(50.80)
the alignment pin is located on the shoulder.
- 1/4-degree back
taper and near polished punch flanks to reduce friction,
eliminate galling and extend punch grind life.
- Maxima® coating
or Nitride treatment available for extreme punching
applications.
Mate QuickLock™ Urethane Strippers
- Positive, on-the-die
stripping to eliminate sheet rattle and reduce punching
noise.
- Two types available (dependent on
punch point size).
-
Mate QuickLock Push-On Urethane Stripper
|
Push-On Urethane Stripper
- Locks securely onto punch and alignment
ring for reliable operation.
- Available for all punches with
a diagonal dimension up to 2.000(50.80).
-
Mate QuickLock Screw-On Urethane Stripper.
Supplied in pairs. |
Screw-On Urethane Stripper
- Available in two sizes: for shaped
punches with width up to 0.394(10.00) and length
up to 2.263(60.00), or length up to 3.000(76.20).
- Supplied in pairs, and fixed to
the punch shoulder with a flat head screw.
Dies
- Highly wear-resistant tool steel with
optimized heat treatment for perfect balance of wear
and toughness for maximum interval between regrinds.
Up to 0.059(1.50) grind life.
- Double-cut die opening for improved
accuracy.
- Uniform clearance radii in die corners
for improved component edge quality.
- Improved die strength with domed relief
to evenly distribute punching forces.
- Superior roundness and flatness for
improved piece part quality.
US/Domestic Catalog (3.9 MB)
 International Catalog (3.9 MB)
The Mate Logo is a registered trademark
of Mate Precision Tooling Inc. QuickLock is a trademark of Mate Precision
Tooling Inc. |
