XMT™ Tooling System For Euromac Punch Presses

Mate's XMT™ Tooling System is the world's first and only tooling designed specifically for Euromac punch presses. Mate's status as Original Equipment Manufacturer for Euromac makes XMT™ tooling the only way to take full advantage of the capabilities of the Euromac XMTE4, XMTE6 and XMTE10 Multi Tool punch holders.

XMTE4 Four station multi tool

• XMT B station Mutli
• Download product bulletin ( 166 kb )

XMTE6 Six station multi tool

• 6x XMT24mm multi tool punches, strippers, and Slug Free® dies
• Download product bulletin ( 220 kb )

XMTE10 Ten station multi tool

• 2x XMT24mm round or shaped multi tool punches, strippers, and Slug Free® dies
• 4x XMT12.7mm round or shaped multi tool punches, strippers, and Slug Free® dies
• 4x XMT12.7mm round only multi tool punches, strippers, and Slug Free® dies.
• Download product bulletin ( 220 kb )

Mate Slug Free® Dies and uniform clearance corners are standard features. Why settle for the ordinary when you have Mate?

Punches: Premium high speed tool steel for exceptional interval between regrinds. 1/4 degree back taper and near polished flanks to reduce friction and eliminate galling. Minute corner radii to reduce chipping. Hardened and ground D shaped pin for precise punch orientation.

Strippers: Hardened for less wear and resistance to punch galling. Tight clearance for better punch guiding; 0.001(0.04) for shapes, 0.002(0.06) for rounds.

Dies: Highly wear resistant, chrome air hardened tool steel with optimum balance between hardness and toughness. SLUG FREE® die geometry eliminates slug pulling. Uniform clearance radii in die corners to improve piece part quality. Shaped dies keyed. 0.059(1.50) grind life, with shims also available. Superior roundness and flatness with exceptional die strength.

Ordering Information:

For more information about tooling to suit Euromac punch presses, please visit www.mate.com/euromac

Dimensions in inches(millimeters).